I cannot connect my PS4 to iKydz WiFi2019-10-08T15:22:52+00:00
  1. Home
  2. Knowledge Base
  3. Troubleshooting
  4. I cannot connect my PS4 to iKydz WiFi

I cannot connect my PS4 to iKydz WiFi

Follow these steps to connect your PS4 gaming console to the iKydz WiFi network.

How to connect a PS4 to iKydz WiFi:

  1. On the main PS4 menu go to Settings and press X.
  2. Scroll down to Network and press X.
  3. Select to Set Up Internet Connection and press X.
  4. Scroll down to Use Wi-Fi and press X.
  5. On the following screen scroll down to Easy then press X.
  6. Select iKydz from the available WiFi network list and press X.
  7. Using the controller in your wireless network password (the default password is ikydzwifi) and press R2.
  8. On the following scroll down to Ok and press X.
  9. The following screen will display Checking network environment followed with a screen showing the Internet settings are updated. At the following screen you can choose internet connection test  and press X . Once this test is complete you have finished the setup.

My PS4 still won’t connect to iKydz WiFi:

Sometimes, connecting a PS4 to a wireless network can take a little more than just connecting quickly. Gaming consoles have a rep for struggling to connect automatically connecting to WIFI networks, and this can depend on lots of different factors. If you are having challenges connecting the PS4 to the iKydz WiFi by following the steps above, then just follow these steps to create a manual connection to iKydz WiFi:

  1. On the main PS4 menu, go to Settings > Network > Set Up Internet Connection > Use Wi-Fi (as per steps 1 to 4 above)
  2. Once you have selected Use Wi-Fi, scroll down to Custom and press X
  3. In the Primary IP Address field, enter the following: 192.168.121.100
  4. In the Primary DNS setting field, enter the following: 192.168.121.1 
  5. Leave the Secondary DNS setting field blank
  6. In the Default Gateway field, enter the following: 192.168.121.1
  7. In the Subnet Mask field, enter the following: 255.255.255.0
  8. Select the MTU as Automatic
  9. Ensure that the Proxy Server is set to Do not use’
  10. Ensure that the DHCP Host Name is set to ‘Do Not Specify’
  11. The following screen will display Checking network environment followed with a screen showing the Internet settings are updated. At the following screen you can choose internet connection test  and press X . Once this test is complete you have finished the setup.

Was this article helpful?

Related Articles